Plate High Inspection Perth

Ensure your new home build is abiding by the Building Code of Australia and get a professional Plate High Inspection.

What’s involved in a Plate High Inspection

A Plate High Inspection is conducted by a building inspector once the brickwork is complete. Our plate high inspection is the visual inspect of brickwork and takes measurements of rooms against any plans provided. At this time we also  observe the slab for cracking and level tolerances. AS4773.2-2015, AS3700-2018 and the BCA is used for inspection reference.

Our Plate High Inspection will verify the condition of the following:
  • Flashings and weep holes
  • Mortar joints & masonry appearance
  • Lintels
  • Roof straps
  • Wall ties
  • Structural columns
  • Internal dimensions
  • Cracking in masonry
  • Wall Cavity
  • Level & plumb
  • Sub-floor construction (if applicable)
  • Wall cladding (if applicable)

Don't know what building inspection you need for your Perth property?

No problem! Give our friendly team a call and we will be able to guide you through the process to ensure you book the right building inspection for your needs.

Why a Perth Plate High Inspection is important

A Plate High Inspection provides homeowners peace of mind knowing that their new home is not only proceeding according to the plans, but also inline with the Building Code of Australia and Australian Standards. It is an inspection that should be completed once the brick work is complete and no later. This allows the building inspector to see all areas that may be of concern and gives the builder time to correct these issues before commencing the next phase of construction.

Perth Plate High Inspection cost

At SURE Building & Pest Perth our pricing for Plate High Inspections depends on the requirement. All prices are inclusive of GST.

$ 440
1 - 2 Bedrooms
$ 550
3 - 4 Bedrooms
$ 660
5 - 6 Bedrooms
Free quote
7+ Bedrooms

Perth Plate High Inspection FAQs

A Plate High Inspection should be completed by a building inspector once the brickwork is complete and before the roof goes on.


Yes. If you are building a home you should complete a Plate High Inspection to ensure your new build is proceeding with the approved plans and inline with The Building Code of Australia and Australian Standards.

A Plate High Inspection is conducted by a building inspector once the brick work is completed on a new build.

A Plate High Inspection verifies the condition of the flashings & weep holes, mortar joints & masonry appearance, lintels, roof straps, wall ties, structural columns, internal dimensions, cracking in masonry, wall cavity, level & plumb, sub-floor construction (if applicable) and wall cladding (if applicable), and so on.

A cut above the rest

Purchasing or building a property in Perth is a significant investment. At SURE Building & Pest, we are qualified professionals, who conduct detailed and thorough inspections, giving you the peace of mind you deserve. We guarantee that you will be glad you chose SURE Building & Pest to conduct your structural or pest inspection on your Perth property.